Initial commit: NAS backup, NFS mount docs, NVMe fix docs

Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>

README.md

@@ -0,0 +1,31 @@
+# System
+
+Scripts and documentation for system administration tasks.
+
+## NAS Backup
+
+`nas-backup.sh` — rsyncs `/data/backup/` (gitea + postgres) to the NFS-mounted NAS at `/mnt/nas/backup/` every 15 minutes.
+
+- **Timer**: `~/.config/systemd/user/nas-backup.timer`
+- **Service**: `~/.config/systemd/user/nas-backup.service`
+- **Sudoers**: `/etc/sudoers.d/nas-backup` (passwordless rsync)
+
+```bash
+# Check status
+systemctl --user status nas-backup.timer
+systemctl --user list-timers nas-backup.timer
+
+# Run manually
+systemctl --user start nas-backup.service
+
+# View logs
+journalctl --user -u nas-backup.service
+```
+
+## NFS NAS Mount
+
+`nfs-nas-mount.md` — NAS connection details and mount configuration for `nas.local.pmagnus.dk:/omarchy` at `/mnt/nas`.
+
+## NVMe Freeze Fix
+
+`nvme-fix-plan.md` — Fix for Kingston SNV2S2000G freezes caused by NVMe deep power state transitions. Applied via `nvme_core.default_ps_max_latency_us=5000` kernel parameter.

config/elephant.service

@@ -0,0 +1,13 @@
+
+[Unit]
+Description=Elephant
+After=graphical-session.target
+
+[Service]
+Type=simple
+ExecStart=elephant
+Restart=on-failure
+
+[Install]
+WantedBy=graphical-session.target
+							

config/fetch-mail.service

@@ -0,0 +1,6 @@
+[Unit]
+Description=Fetch Medium Daily Digest emails
+
+[Service]
+Type=oneshot
+ExecStart=/home/pmp/ai/medium/fetch-mail.sh

config/fetch-mail.timer

@@ -0,0 +1,9 @@
+[Unit]
+Description=Fetch Medium emails daily at 6:30
+
+[Timer]
+OnCalendar=*-*-* 06:30:00
+Persistent=true
+
+[Install]
+WantedBy=timers.target

config/nas-backup.service

@@ -0,0 +1,6 @@
+[Unit]
+Description=Rsync backup to NAS
+
+[Service]
+Type=oneshot
+ExecStart=/home/pmp/ai/system/nas-backup.sh

config/nas-backup.timer

@@ -0,0 +1,9 @@
+[Unit]
+Description=Rsync backup to NAS every 15 minutes
+
+[Timer]
+OnCalendar=*:0/15
+Persistent=true
+
+[Install]
+WantedBy=timers.target

config/omarchy-battery-monitor.service

@@ -0,0 +1,9 @@
+[Unit]
+Description=Omarchy Battery Monitor Check
+After=graphical-session.target
+
+[Service]
+Type=oneshot
+ExecStart=%h/.local/share/omarchy/bin/omarchy-battery-monitor
+Environment=DISPLAY=:0
+LogLevelMax=warning

config/omarchy-battery-monitor.timer

@@ -0,0 +1,11 @@
+[Unit]
+Description=Omarchy Battery Monitor Timer
+Requires=omarchy-battery-monitor.service
+
+[Timer]
+OnBootSec=1min
+OnUnitActiveSec=30sec
+AccuracySec=10sec
+
+[Install]
+WantedBy=timers.target

nas-backup.sh

@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+SRC="/data/backup/"
+DEST="/mnt/nas/backup/"
+
+# Ensure NAS is mounted
+if ! mountpoint -q /mnt/nas; then
+    echo "NAS not mounted at /mnt/nas, skipping backup" >&2
+    exit 1
+fi
+
+mkdir -p "$DEST"
+sudo rsync -a --delete --no-group --no-perms --no-owner "$SRC" "$DEST"

nfs-nas-mount.md

@@ -0,0 +1,34 @@
+# NFS NAS Mount
+
+## NAS Details
+- **Hostname**: `nas.local.pmagnus.dk`
+- **IP**: `192.168.50.112`
+- **Protocol**: NFSv4.1
+
+## Available NFS Exports
+All exports are accessible from `192.168.50.0/24`:
+- `/vol01`, `/vm`, `/umbrel`, `/pve`, `/omarchy`, `/k8s`, `/docker`, `/Dev1Partition1`, `/data`, `/citadel`, `/btcdata`
+
+## Current Mount
+- **Source**: `nas.local.pmagnus.dk:/omarchy`
+- **Mount point**: `/mnt/nas`
+- **Options**: `rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,hard,proto=tcp`
+- **Size**: 7.1T total, 127G used (2%)
+- **Contents**: `backup/`, `@Recycle/`
+
+## Useful Commands
+```bash
+# Show NAS exports
+showmount -e nas.local.pmagnus.dk
+
+# Mount
+sudo mount -t nfs nas.local.pmagnus.dk:/omarchy /mnt/nas
+
+# Persistent mount (add to /etc/fstab)
+nas.local.pmagnus.dk:/omarchy /mnt/nas nfs defaults,_netdev 0 0
+```
+
+## Notes
+- This machine: `192.168.50.42` on `enp88s0`
+- `nmap` is not installed; use `ip neigh show` for network discovery
+- `sudo` requires a terminal (not available from Claude Code)

nvme-fix-plan.md

@@ -0,0 +1,76 @@
+# NVMe Freeze Fix Plan — Kingston SNV2S2000G
+
+## Problem
+System freezes and SSHD becomes unresponsive due to NVMe I/O write timeouts.
+The Kingston SNV2S2000G firmware fails to wake from deep power states (PS3/PS4) in time,
+causing the kernel to abort I/O operations and eventually hard-lock the system.
+
+- 152 NVMe I/O timeout errors logged in previous boot (Feb 17-20)
+- 1 NVMe controller reset (Feb 19 09:41)
+- 52 unsafe shutdowns (hard power-offs from freezes)
+- SMART health: PASSED — drive is not failing, firmware power management is the issue
+
+## Root Cause
+NVMe Autonomous Power State Transition (APST) puts the drive into PS3/PS4.
+Exit latencies (5ms / 70ms) exceed what the firmware can reliably handle,
+causing write and flush operations to time out.
+
+## Fix: Disable Deep NVMe Power States
+
+### Step 1 — Apply kernel parameter
+
+Run with sudo in a terminal:
+
+```bash
+sudo sed -i 's|rootfstype=btrfs|rootfstype=btrfs nvme_core.default_ps_max_latency_us=5000|' /boot/limine.conf
+```
+
+### Step 2 — Verify the change
+
+```bash
+grep nvme_core /boot/limine.conf
+```
+
+Every `cmdline:` line should now end with `nvme_core.default_ps_max_latency_us=5000`.
+
+### Step 3 — Reboot
+
+```bash
+sudo reboot
+```
+
+### Step 4 — Confirm after reboot
+
+```bash
+# Verify kernel parameter is active
+cat /proc/cmdline | grep nvme_core
+
+# Monitor for NVMe errors (should show nothing new)
+journalctl -b -k | grep -i 'nvme.*timeout'
+```
+
+## Monitoring
+
+Watch for recurrence over the next few days:
+
+```bash
+# Check for any NVMe timeouts in current boot
+journalctl -b -k | grep -i 'nvme.*timeout'
+
+# Check SMART data periodically
+sudo smartctl -a /dev/nvme0
+```
+
+## If Freezes Continue
+
+1. Try a stricter latency limit: change `5000` to `0` (disables all power state transitions)
+2. Check for Kingston firmware updates for SNV2S2000G (current: SBK00104)
+3. If nothing helps, the drive may need replacement despite passing SMART checks
+
+## Drive Info
+- Model: KINGSTON SNV2S2000G (2TB)
+- Serial: 50026B7784F6ACF9
+- Firmware: SBK00104
+- Percentage Used: 5%
+- Bootloader: Limine
+- Config: /boot/limine.conf